Cantilever Liftgate

Cantilever Liftgate for 2500 KG Capacity

1. Hydraulic cylinders are made of nickel-plated pistons and dust-proof rubber sleeves.

2. The hydraulic station has a built-in flow control valve, which can adjust the lifting and turning speed.

3. There are three built-in protection switches, which can effectively prevent the circuit or motor from being burned when the car circuit is short-circuited, the battery voltage is low or the current is too high, and the tail lift is overloaded.

4. The explosion-proof safety valve can be built in the hydraulic cylinder according to the customer's requirements, which can prevent the liftgate and the cargo from being damaged when the oil pipe bursts.

5. All are equipped with anti-collision bars to separate the tail lift and the tailgate of the car to avoid damage caused by long-term collisions between the liftgate of the car.

6. All hydraulic cylinders of the 3N tail lift adopt thickened cylinders, which are strong and durable, so there is no need to install suspension bumpers at the bottom of the tailgate to protect the hydraulic cylinders.

7. The circuit is equipped with a safety protection system, and when the tail gate is raised to be level with the compartment, the circuit is automatically cut off.
The basic parameters of the 3N Liftgate:

Lifting weight: 300KG/500KG/1000KG/1500KG/2000KG/2500KG

Falling speed: 0.07m/s

Ascent speed: 0.07m/s

Tilt Angle: It can be adjusted up to 118 degrees from the vertical direction.

Voltage: 12V/24V/48V/72V/220V/380V

Power supply: The capacity of the car battery should not be less than 160AH (Ah)

System pressure: 10Mpa/12Mpa/16Mpa/18Mpa/22Mpa

Motor power: 800W/1200W/1500W/2200W/2500W/3000W

High-strength Steel 3N Liftgate Specifications

High Strength Aluminum Alloy 3N Liftgate Specifications