Retractable Liftgate

Retractable liftgates are rare in the market, and these products are divided into two categories: cantilever retractable liftgate and hidden retractable liftgate. The cantilever-type retractable liftgate means the platform of the tail lift can be folded into two parts through hinges to achieve the purpose of reducing the windshield area and facilitating storage. When in use, manually open the tip of the board and spread it out as a whole to start using. The advantages of this foldable cantilever-type retractable liftgate are:

1. Reduce the air resistance during the high-speed driving of the flatbed;

2. It will not be super high for the flatbed itself, which meets the height limit requirements of public roads or underground places;

3. It is extremely convenient for the height-limited underground garage.

The feature of the rear-mounted retractable tail lift is that the tail lift surface can be directly hidden at the bottom of the carriage. When the customer does not need the tail lift to load and unload goods, the liftgate will not hinder the loading and unloading of goods because it blocks the rear door, which is convenient for trucks to park on the platform. For example, for goods that require constant temperature storage, the warehouse door is equipped with an extendable insulation cover, which is directly connected to the carriage when loading and unloading. At this time, if the tail lift adopts a rear-mounted cantilever liftgate, the docking cannot be completed. The hidden retractable liftgate is very convenient for this. Its basic working principle is: the main parts of the tail lift (large plate, lifting arm, oil cylinder) are moved to the bottom of the truck compartment. When working, the plate slides to the rear end of the compartment through a sliding rod mechanism, and is driven manually or by an oil cylinder. Open the folding plate, and now it can work like a common tail lift. According to the way of opening, the retractable liftgate can be divided into two kinds: manual opening and electric opening.

3N brand hidden retractable liftgate has 3 capacities: 0.5 ton, 1.0 tons, and 1.5 tons.

Rear-Mounted Retractable Tail Lift for Sale

3N liftgate has the following characteristics:

1. Hydraulic cylinders are made of nickel-plated pistons and dust-proof rubber sleeves.

2. The hydraulic station has a built-in flow control valve, which can adjust the lifting and turning speed.

3. There are three built-in protection switches, which can effectively prevent the circuit or motor from being burned when the car circuit is short-circuited, the battery voltage is low or the current is too high, and the tail lift is overloaded.

4. The explosion-proof safety valve can be built in the hydraulic cylinder according to the customer's requirements, which can prevent the liftgate and the cargo from being damaged when the oil pipe bursts.

5. All are equipped with anti-collision bars to separate the tail lift and the tailgate of the car to avoid damage caused by long-term collisions between the liftgate of the car.

6. All hydraulic cylinders of the 3N tail lift adopt thickened cylinders, which are strong and durable, so there is no need to install suspension bumpers at the bottom of the tailgate to protect the hydraulic cylinders.

7. The circuit is equipped with a safety protection system, and when the tail gate is raised to be level with the compartment, the circuit is automatically cut off.
The basic parameters of the 3N Liftgate:

Lifting weight: 300KG/500KG/1000KG/1500KG/2000KG/2500KG

Falling speed: 0.07m/s

Ascent speed: 0.07m/s

Tilt Angle: It can be adjusted up to 118 degrees from the vertical direction.

Voltage: 12V/24V/48V/72V/220V/380V

Power supply: The capacity of the car battery should not be less than 160AH (Ah)

System pressure: 10Mpa/12Mpa/16Mpa/18Mpa/22Mpa

Motor power: 800W/1200W/1500W/2200W/2500W/3000W

High-strength Steel 3N Liftgate Specifications

Model	*Dimension Width Height (mm)**	Maximum Bed Height (mm)	Capacity (KG)	Platform Steel Type	Rated pressure MPa	Plate Thickness (MM)	Weight (KK)
3N-PP500/G05	1300*1200	900mm	500kg	Q355b	10	3mm	250kg
3N-PP1000/G10	1800*1700	1250mm	1000kg	Q355b	14	3mm	350kg
3N-PP1500/G15	18001800 20001800 20601800 21301800 22101800 23401800 2450*1800	1520mm	1500kg	Q355b	16	3.5mm	500kg
3N-PP2000/G20		15200mm	2000kg	Q355b	18	3.5mm	550kg
3N-PP2500/G25		15200mm	2500kg	Q355b	20	4.5mm	600kg
3N-PP3000/G30		15200mm	3000kg	Q355b	22	5mm	650kg

High Strength Aluminum Alloy 3N Liftgate Specifications

Model	*Dimension Width Height (mm)**	Maximum Bed Height (mm)	Capacity (KG)	Platform Material	Rated Pressure MPa	Plate Thickness (MM)	Weight (KG)
3N-PP500/L05	1300*1200	900mm	500kg	High Strength Aluminum Alloy	10	3mm	200kg
3N-PP1000/L10	1800*1700	1250mm	1000kg	High Strength Aluminum Alloy	14	3mm	350kg
3N-PP1500/L15	18001800 20001800 20601800 21301800 22101800 23401800 2450*1800	1520mm	1500kg	High Strength Aluminum Alloy	16	3.5mm	500kg
3N-PP2000/L20		15200mm	2000kg	High Strength Aluminum Alloy	18	3.5mm	550kg