3N
vertical tail lift has capacity for 200KG, 500KG, 1000KG, 1500KG, 2000kg,
2500KG and 3000KG, and according to the lifting height, we have 0.7m, 1.05m,
1.65m, 2.3m and other model tail lifts. In order to stop loading and unloading
goods up and down at any position within the range of 0~200cm. The vertical tail lift of car for sale are mainly widely used for the vehicle’s compartment with 2 or 3
layers to transport animals such as pigs and cattle, as well as
electromechanical products such as e-bikes, motorcycles, and small ships.
Another feature of this type of liftgate is that the platform can be used as a truck
door, and generally there is no need to install a truck tailgate; and this type
of liftgate is that it basically needs to be custom made.
1. Hydraulic cylinders are made of nickel-plated pistons and dust-proof rubber sleeves.
2. The hydraulic station has a built-in flow control valve, which can adjust the lifting and turning speed.
3. There are three built-in protection switches, which can effectively prevent the circuit or motor from being burned when the car circuit is short-circuited, the battery voltage is low or the current is too high, and the tail lift is overloaded.
4. The explosion-proof safety valve can be built in the hydraulic cylinder according to the customer's requirements, which can prevent the liftgate and the cargo from being damaged when the oil pipe bursts.
5. All are equipped with anti-collision bars to separate the tail lift and the tailgate of the car to avoid damage caused by long-term collisions between the liftgate of the car.
6. All hydraulic cylinders of the 3N tail lift adopt thickened cylinders, which are strong and durable, so there is no need to install suspension bumpers at the bottom of the tailgate to protect the hydraulic cylinders.
7. The circuit is equipped with a safety protection system, and when the tail gate is raised to be level with the compartment, the circuit is automatically cut off.
The basic parameters of the 3N Liftgate:
Lifting weight: 300KG/500KG/1000KG/1500KG/2000KG/2500KG
Falling speed: 0.07m/s
Ascent speed: 0.07m/s
Tilt Angle: It can be adjusted up to 118 degrees from the vertical direction.
Voltage: 12V/24V/48V/72V/220V/380V
Power supply: The capacity of the car battery should not be less than 160AH (Ah)
System pressure: 10Mpa/12Mpa/16Mpa/18Mpa/22Mpa
Motor power: 800W/1200W/1500W/2200W/2500W/3000W
High-strength Steel 3N Liftgate Specifications
|
Model |
Dimension Width* Height (mm) |
Maximum Bed Height (mm) |
Capacity (KG) |
Platform Steel Type |
Rated pressure MPa |
Plate Thickness (MM) |
Weight (KK) |
|
3N-PP500/G05 |
1300*1200 |
900mm |
500kg |
Q355b |
10 |
3mm |
250kg |
|
3N-PP1000/G10 |
1800*1700 |
1250mm |
1000kg |
Q355b |
14 |
3mm |
350kg |
|
3N-PP1500/G15 |
1800*1800 2000*1800 2060*1800 2130*1800 2210*1800 2340*1800 2450*1800 |
1520mm |
1500kg |
Q355b |
16 |
3.5mm |
500kg |
|
3N-PP2000/G20 |
15200mm |
2000kg |
Q355b |
18 |
3.5mm |
550kg |
|
|
3N-PP2500/G25 |
15200mm |
2500kg |
Q355b |
20 |
4.5mm |
600kg |
|
|
3N-PP3000/G30 |
15200mm |
3000kg |
Q355b |
22 |
5mm |
650kg |
High Strength Aluminum Alloy 3N Liftgate Specifications
|
Model |
Dimension Width* Height (mm)
|
Maximum Bed Height (mm) |
Capacity (KG) |
Platform Material |
Rated Pressure MPa |
Plate Thickness (MM) |
Weight (KG) |
|
3N-PP500/L05 |
1300*1200 |
900mm |
500kg |
High Strength Aluminum Alloy |
10 |
3mm |
200kg |
|
3N-PP1000/L10 |
1800*1700 |
1250mm |
1000kg |
High Strength Aluminum Alloy |
14 |
3mm |
350kg |
|
3N-PP1500/L15 |
1800*1800 2000*1800 2060*1800 2130*1800 2210*1800 2340*1800 2450*1800 |
1520mm |
1500kg |
High Strength Aluminum Alloy |
16 |
3.5mm |
500kg |
|
3N-PP2000/L20 |
15200mm |
2000kg |
High Strength Aluminum Alloy |
18 |
3.5mm |
550kg |
